Teltonics TSW010 Switch 5 10/100 ports
Teltonics TSW010 Switch 5 10/100 ports
w/ VAT
Teltonika TSW010 – 5-Port 10/100 Mbps DIN Rail Ethernet Switch
Industrial Teltonika TSW010 switch with 5 Ethernet ports supporting 10/100 Mbps, DIN rail mounting and 9–30 VDC power supply.
Key Benefits
-
Plug-and-play operation with no additional configuration required. Simply connect the cables and the switch is ready to use, with no on-site setup needed.
-
5 x RJ45 ports supporting 10/100 Mbps, with auto MDI/MDIX crossover. There is no need to check whether the Ethernet cable is straight-through or crossover.
-
Integrated DIN rail mounting bracket. The switch can be secured inside a cabinet or control panel without additional mounting components. An additional kit is required for wall or flat-surface mounting.
-
9–30 VDC power supply via a 2-pin industrial connector. It can also be powered through the ETH1 port using passive PoE (Mode B), which is useful where running a separate power cable is inconvenient.
-
Power consumption of 0.3 W at idle and up to 0.9 W under load, with an operating temperature range of -40 °C to 75 °C. Suitable for compact cabinets with limited power and cooling capacity.
-
1 Gbps non-blocking throughput, a MAC address table with 2K entries and jumbo frame support of up to 2048 bytes. This is sufficient for connecting several devices at speeds of up to 100 Mbps.
An excellent choice for:
-
Electricians and installers of control panels and cabinets. The DIN rail mounting bracket is integrated, the power supply range is 9–30 VDC, and the operating temperature range is -40 °C to 75 °C.
-
Automation and telemetry system integrators. Connects controllers, sensor gateways, cameras or routers when the ports on the main device are insufficient. The speed of up to 100 Mbps is adequate for this type of traffic.
-
Sites where network equipment should work without manual configuration. The switch operates on a plug-and-play basis and requires no additional setup.
-
Expansion of a mobile router installation, such as the Teltonika RUT901. The router has only three LAN ports, while this switch adds five more.
-
Energy-constrained installations. Power consumption is 0.3 W at idle and up to 0.9 W under maximum load.
Technical Specifications
| GENERAL | |
| Model / Product code | Teltonika TSW010 / TSW010000000 |
| Type | DIN rail Ethernet switch |
| Ethernet ports | 5 x RJ45, 10/100 Mbps, auto MDI/MDIX crossover |
| IEEE 802.3 standards | 802.3i, 802.3u, 802.3x, 802.3az |
| Throughput (non-blocking) | 1 Gbps |
| MAC address table size | 2K entries |
| Jumbo frame | 2048 bytes |
| Configuration | Plug and play, no additional configuration required |
| Profinet | Profinet Class A supported only by the optional product code (TSW010000001); not supported by TSW010000000 |
| Indicators | 1 x Power LED, 10 x ETH status LEDs |
| POWER SUPPLY | |
| Connector | 1 x 2-pin industrial DC connector |
| Input voltage | 9–30 VDC |
| Passive PoE | Power supply via ETH1 port, Mode B, 9–30 VDC; not compatible with IEEE 802.3af, 802.3at and 802.3bt |
| Power consumption | Idle: 0.3 W / Max: 0.9 W |
| DIMENSIONS AND WEIGHT | |
| Housing | Aluminium housing |
| Dimensions (W x H x D) | 113.1 x 27.4 x 80.5 mm |
| Weight | 146.5 g |
| Mounting | Integrated DIN rail mounting bracket; wall mounting and flat-surface mounting require an additional kit |
| Box dimensions (W x H x D) | 175 x 35 x 150 mm |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 5% to 95%, non-condensing |
| Protection rating | IP30 |
| CERTIFICATIONS AND APPROVALS | |
| Regulations and approvals | CE, UKCA, EAC, FCC, IC, CB, RCM, CITC, ANRT, SDPPI (POSTEL), Kenya, REACH, RoHS, WEEE, UL Safety, MTCTE |
| Safety standards | EN IEC 62368-1:2020 + A11:2020 (CE); AS/NZS 62368.1:2022 (RCM); IEC 62368-1:2018 (CB) |
| PACKAGE CONTENTS | |
| In the box | TSW010 switch, Quick Start Guide (standard package without power adapter) |
Description
The TSW010 is an industrial switch designed for situations where a router, controller or camera is already installed, but additional network ports are needed. Its five RJ45 ports support 10/100 Mbps and feature auto MDI/MDIX, so there is no need to check whether the Ethernet cable is straight-through or crossover. The switch is plug and play and requires no additional configuration, making it suitable for control panels and cabinets where network settings are not required. The integrated bracket allows it to be mounted on a DIN rail, while an additional kit is required for wall or flat-surface mounting.
Power is supplied at 9–30 VDC via a 2-pin industrial connector. When required, the switch can also be powered through the ETH1 port using passive PoE (Mode B). Passive PoE is not compatible with the IEEE 802.3af, 802.3at and 802.3bt standards, so the power source must provide passive PoE within the 9–30 VDC range. Power consumption is 0.3 W at idle and up to 0.9 W under maximum load. The operating temperature range is -40 °C to 75 °C, and the device has an IP30 protection rating.
The ports support speeds of up to 100 Mbps, so this switch is not intended for connections requiring speeds above 100 Mbps. No power adapter is included in the package; the box contains the switch and a Quick Start Guide.
| Manufacturer | TELTONIKA |
| Warranty | 24 months |
| Product code | TSW010000000 |
| Barcode | 4779051847013 |
| Ports |
5 x RJ-45
|
| Standard |
IEEE 802.3, IEEE 802.3az, IEEE 802.3u
|
| MAC Address |
2K
|
| Protocols | |
| Operating temperature |
-40 - 75 °C
|
| Power Requirement |
9 - 30 V
|
| Buffer Memory |
128K
|
| LED Indicators | |
| Rack-mount | |
| PoE | |
| Dimension (mm) |
27.4 x 113.1 x 80.5 mm
|
| Weight | 0.147 kg |
Quantity discounts